to 6500 mm. Metal Weckman 3 / 1120 has the following geometric parameters: length of a sheet of metal – from 350 mm. to 6500 mm. the breadth of the sheet metal 1180 mm. (Including the useful width 1120 mm sheet.) Length of the step tile – 186.7 mm., Wave height – 42 mm.
Metal Weckman 4 / 1110 has the following geometric parameters: the width of the sheet metal 1190 mm. (Including the useful width 1100 mm sheet.) Wave height – 39 mm., The length of the sheet metal – from 350 mm. to 6500 mm.; stride tiles – 183.3 mm. Metal Gassell Profile (Sweden) made of galvanized steel sheets 0.5 mm thick. Which is passivated, primed and coated with a protective layer of colored polymer (plastisol), a thickness of 200 microns. Metal has Gassell Profile The following geometric parameters: wave height – 39 mm.; sheet width 1180 mm. (Including the useful width 1100 mm sheet.) Length of the step tile – 350 mm.; Overlap in length – 100 mm., Standard length of the sheet metal – 3600, 2200, 1150, 450 mm. Scandinavian metal Gassell Profile, considering the physical and chemical characteristics of the plastisol may be applied at ambient temperature to 60 degrees, which, of course, is not well suited for roofing in the southern regions of Russia.
Weight metal Gassell Profile of approximately 4.6 kg. / m square. Dutch metal Finish Profiles BV is made of galvanized sheet steel with a thickness of 0.4 mm., Which was subsequently passivated, primed and covered with a protective a layer of colored resin (polyester), a thickness of 35 microns. Metal Finish Profiles BV is stated below the geometric properties: the width of the sheet metal 1185 mm. (Including the useful width 1100 mm sheet.) Wave height – 35 mm., Stride length – 350 mm.; standard length of the sheet metal – 450, 1150, 3600, 2200 mm.; overlap in length – 100 mm. Metal Finish Profiles BV may be used at temperatures up to 120 degrees Celsius, so that may be used, including, in the southern regions of Russia. Weight metal Pelti Ja Rauta extremely low at around 3.8 kg. / m square. Domestic metal Omi, appeared in the construction market in 2001, is made from galvanized steel with thickness of 0.45-0.55 mm, which passivated and covered with a protective layer of colored polymer coating (pura, PVC plastisol 200, matte polyester, plastisol HPS 200, PVDF, polyester). The company has two types of Omi Profile metalocherepitsy. Metal Omi Pamir has indicated geometric parameters: wave height – 20 mm.; sheet length – from 840 mm. up to 10,000 mm.; useful width of sheet metal 1120 mm.; stride tiles – 224 mm. Omi Classic Metal has specified dimensions: useful width 1110 mm sheet metal.; Stride Length – 185 mm., the length of the sheet metal – from 840 mm. up to 10,000 mm., wave height – 30 mm. Scandinavian metal Takotta, decent sample continuity of tradition and high culture of production, made from galvanized steel thickness of 0.4-0.5 mm, which is passivated and covered with a layer of colored polymer coating (PRELAC new (PN), matte polyester (MPE), polyester (PE), plastisol (PVC), armatek (AT)).