Month: June 2012
Gearbox in Housing
Posted on June 21, 2012 in News
To drain fluid from the evacuated container, and transportation via pipeline of various products with high viscosity were widely used diaphragm pumps. The main working body is the membrane elastic sheet materials: rubber or fabric coated with polymers. As the valves are used Teflon beads or plates. Depending on the design of the control diaphragm pumps are classified in pumps with mechanical, pneumatic and hydraulic actuators. The most widely used were the first two types. Mechanical drive includes a gear and motor life.
Gearbox mounted in the housing and consists of a worm and worm wheel with an eccentric. Planted on the eccentric rod, the other end is hinge connected to the piston. At the end of piston has a threaded hole into which is screwed a stud that connects crank mechanism with the membrane. Membrane clamped between the plates of the special nut and between the pump casing and lid – wing nuts. Together with a cover molded tee in vertical nozzles which are placed inlet and outlet ball valves. In the process of rotation of the drive is transmitted to the worm wheel with an eccentric. Connecting rod receives a reciprocating motion and passes it to the piston, which moves in the pocket and drives the membrane. When moving the latter together with the piston to the right in the chamber creates a negative pressure. Discharge valve is pressed against the socket tee and prevents entry into the chamber air intake opens and the milk into the chamber.
Russian Billiards
Posted on June 2, 2012 in News
General rules for Russian billiards These rules are common to all the following varieties of Russian billiards. 1. Billiard tables, balls and accessories. All of the following billiard game should be conducted with the use of billiard tables, balls and accessories that meet the requirements of section "Technical Requirements to the pool equipment." 2. Arrange the balls. Before the game, fifteen object balls with the help of triangle set close to each other in a pyramid with the apex on the foot spot and the base parallel to the short side. 3. Strike the cue-ball.
Strike the cue-ball should be made part of the front tip of the cue in the direction of its longitudinal axis, with at least one foot must touch the floor playing. Implementation of stroke in any other manner shall be punished by a foul. 4. Raffle kick-off. Right at the first blow in a meeting determined by lottery. Located on the opposite side of the longitudinal line of the table, the players simultaneously make beats with your hands out of the house, sending the ball to the back board and back. The winner is the player whose ball reflected from the rear side, stops close to the front.
The drawing is automatically lost if the cue ball did not touch on the tailgate, walked half a rival, fell into a pocket or jumped overboard. If the rules violated both players or both of the cue ball stopped at the same distance from the side, the rally is repeated. The winner of the drawing has the right either to make the kick himself, or to cede to his opponent. In subsequent batches observed sequence. Before the last decisive game draw repeats. 5. A kick-off (with his hands out of the house). When this strike is forbidden to make housing for the continuation of the outside of the long sides, and also have the cue ball behind the line of the house.
